ISR PERFORMANCE GENESIS COUPE 2.0T EVO 9 20G BOLT-ON TURBO KIT 2010 - 2014

ISR Performance EVO 9 20G Bolt-on Turbo Kit for the Genesis Coupe 2.0T

ISR performance EVO 8/9 bolt-on turbo kit is designed to ISR Performance RS TD05HR 20G Turbocharger capable of 335hp-365hp. This kit is designed with factory placement in mind so your intake, intercooler hot pipe and down pipe will bolt right up to this turbo kit. 

Kit Includes :

• Twin Scroll Tubular Manifold with Schedule 40 thickness steel
• ISR Performance RS TD05HR 20G Turbocharge
• O2 Turbine Housing design to bolt up to factory downpipe *or aftermarket down pipe with factory placement. 
• Actuator adapter bracket with J-pipe 
• Turbo Line kit 

EVO9 turbo customers: Helpful tip on wastegate install

The bracket shown in the pictures provided is for an evo 9 turbo with evo 9 wastegate actuator.  The evo 9 turbo is a larger frame turbo than the 8 and it a very tight fit in the gen coupes.  The wastegate actuator arm also extends further out on the 9s vs the 8s.  Due to the limited space with the larger turbo and the actuator arm extending further out the bracket that holds the actuator in place needs to be at a 90 degree angle AND the bracket on the actuator itself has to be cut and new holes have to be drilled into the actuator bracket for best fitment.  We recommend the customer bolt the manifold in place, mount the turbo, clock the compressor housing and figure out the best position to mount the wastegate before drilling the holes.  This would be the best way to insure fitment.  

Notes: Kit reuses oem BK1 (2010-12) oil return fitting for BK1's.   
BK2's (2013-14) will need to make their own return fitting / line as the engine mount for the BK2 is larger and the oem solution will not work
Also keep in mind that this is a starter kit. Everything is bolt on but supporting mods are required like a tune, injectors, etc.